Federal Specifications
Chain-Link Fence Fabric
(RR-F-191 1D)
Coating Type
Type I - Zinc-coated steel 1.2 oz. a square foot
-
Type II - Aluminum-coated steel
.40 oz. a square foot (6 & 9 Gauge)
.35 oz. a square foot (11 Gauge)
Type III - Aluminum alloy
-
Type IV - Polyvinyl Chloride (PVC) coated over zinc coated steel
Extruded & Adhered (Class 2a)
.40 oz. a square foot (6 Gauge)
.30 oz. a square foot (9 & 11 Gauge)
7 mil MINIMUM PVC Coating (Class 2b)
Wire Size (Outside Diameter of Metal Wire)
- 11 Gauge (.120 inches)
- 9 Gauge (.148 inches)
- 6 Gauge (.192 inches)
Mesh Sizes
- 2 1/8"
- 2"
- 1 3/4"
- 1" (9 & 11 Gauge only)
Salvage
Chain-Link Fence Gates
(RR-F-191 2D)
Gate Type
- Type I - Single Swing
- Type II - Double Swing
- Type III - Single Cantilever Sliding
- Type IV - Double Cantilever Sliding
- Type V - Single Overhead Sliding
- Type VI - Double Overhead Sliding
- Type VII - Vertical Lift
- Type VIII - Special
Chain-Link Fence Post & Rails
(RR-F-191 3D)
Classification
-
Class 1 - Steel Pipe
Grade A - Schedule 40 Galvanized
Grade B - SS-40 Galvanized
- Class 2 - Aluminum Pipe
- Class 3 - Formed Steel Sections
- Class 4 - Steel H-sections
- Class 5 - Aluminum H-sections
- Class 6 - Steel square sections
- Class 7 - Aluminum square sections
Size & Minimum Wall Thickness
- SP1 - 1.660 OD x 0.111 wall
- SP2 - 1.90 OD x 0.120 wall
- SP3 - 2.375 OD x 0.130 wall
- SP4 - 2.875 OD x 0.160 wall
- SP5 - 4.00 OD x 0.226 wall
- SP6 - 6.625 OD x 0.280 wall
- SP8 - 8.625 OD x 0.322 wall
| Post Use Class 1 |
| Top Rail & Brace |
|
SP1 |
| Terminal |
up to 6' high |
SP3 |
| over 6' high |
SP4 |
| Line |
up to 6' high |
SP2 |
| up to 8' high |
SP3 |
| over 8' high |
SP4 |
| Gate |
up to 6' leaf width |
SP4 |
| up to 13' leaf width |
SP5 |
| up to 18' leaf width |
SP6 |
| up to 23' leaf width |
SP7 |
